Foam Board / Continuous Insulation

Johns Manville Polyiso foam continuous insulation boards provide a layer of insulation to reduce thermal bridging and improve energy efficiency. Polyiso consists of a uniform closed-cell polyisocyanurate foam core and provides one of the highest R-values per inch of any rigid insulation.

Discover our Polyiso educational resources here.

Jump To

Foam Board, Continuous Insulation

AP Foil-Faced Foam Continuous Insulation

With exceptional heat, moisture and air control, Johns Manville AP™ Foil-Faced Polyiso Foam Sheathing eliminates all major thermal bridges that cause heat loss when installed correctly.

X

Data Sheet

SDS

Product Guide

Johns Manville AP™ Foil-Faced Polyiso Foam Sheathing boards are available in R-Values up to R-28 and offer a reflective foil facer on one side and a non-reflective facer on the other. AP Foil provides exceptional heat, moisture and air control and, when installed correctly, eliminates all major thermal bridges that cause heat loss. The rigid continuous insulation board allows for maximum wall and worksite efficieny.

Advantages

Thermally Efficient: Effective resistance to heat transfer, with R-values up to R-28.
Water-Resistive Barrier: Meets the ICC-ES AC71 acceptance criteria.
Vapor Barrier: Class I vapor retarder at one inch.
Air Barrier: Meets the Air Barrier Association of America boardstock criteria, when properly installed.
Lightweight: Easy to handle and may be cut with a utility knife or saw.

ASTM Standards	ASTM C1289	Type I, Class 1
Flame Spread	ASTM E84	4": ≤ 25
Smoke Development	ASTM E84	≤ 450
Water Vapor Transmission	ASTM E96	0.05 perms (3 ng/Pa-s-m²)
Compressive Strength	ASTM D1621	≥ 16 psi (110 kPa)
Water Absorption	ASTM C209	0.1% volume
Service Temperature		-100 to 250°F
R-Value Per Inch		6.0

JM Foam Board Video

JM Overview Video

JM Continuous Insulation Video

Polyiso Continuous Insulation Wall Systems: The Perfect Wall

JM CI and Building Science

(webinar)

JM Continuous Insulation and Building Science

Available Documents

CI Max Foam Continuous Insulation

Designed for easy installation in exposed interiors, Johns Manville CI Max® Polysio Foam Continuous Insulation is ideal for places where high efficiency is required.

X

Data Sheet

SDS

Product Guide

Johns Manville CI Max^® Polyiso Foam Continuous Insulation is available in R-Values up to R-26 and provides a layer of insulation to reduce thermal bridging and improve energy efficiency. CI Max Continuous Insulation is designed for exposed interior applications and is approved for use without a thermal barrier. It is suitable for wall or ceiling applications in residential, commercial, agricultural and industrial buildings.

Advantages

Thermally Efficient: Effective resistance to heat transfer, with R-values up to R-26.
Vapor Barrier: Maintains a minimum thickness of one inch and qualifies as a Class I vapor retarder.
Lightweight: Easy to handle and may be cut with a utility knife or saw.

ASTM Standards	ASTM C1289	Type I, Class 1
Flame Spread	ASTM E84	4": ≤ 25
Smoke Development	ASTM E84	≤ 450
Water Vapor Transmission	ASTM E96	0.02 perms (1.4 ng/Pa-s-m²)
Compressive Strength	ASTM D1621	≥ 16 psi (110 kPa)
Water Absorption	ASTM C209	< 0.6% volume
Service Temperature		-100 to 250°F
R-Value Per Inch		6.0