PVC Roofing Systems

Family Description

Built to withstand the test of time, our PVC roofing membranes are made to resist the toughest weather conditions and chemicals.

JM PVC with Dow Elvaloy® KEE and JM PVC SD Plus thermoplastic roofing membranes are manufactured using an ultraviolet-resistant polyvinyl chloride. Utilizing a polyester fabric reinforcement allows for systems to be both mechanically attached and adhered. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.

Built to withstand the test of time, our PVC roofing membranes are made to resist the toughest weather conditions and chemicals.

Products

PVC Membranes

JM PVC FB with Elvaloy® KEE Polymer
JM PVC with KEE FB is a heat weldable thermoplastic membrane that utilizes a Spunbond 3.8 oz. fleece creating an extremely durable, strong yet light and flexible protection layer.
JM PVC SD Plus
JM PVC SD Plus is a heat weldable thermoplastic polyvinyl chloride membrane available in 50, 60, and 80 mil.
JM PVC SD Plus FB
JM PVC SD Plus FB is a fleece-backed PVC membrane with reinforced polyester scrim, providing strength and toughness. It is resistant to oils and fuels, with white membranes offering energy savings. It features a patented Aramid-Reinforced Edge and a Spunbond 3.8 oz. Polyester Fleece Back Mat for durability and flexibility.
JM PVC with Elvaloy®* KEE Polymer
JM PVC with the optimal amount of Elvaloy®* KEE is a heat weldable polyvinyl chloride thermoplastic membrane that provides superior resistance against oil, fuels, and other hard chemicals.
PVC mil/MIN with Elvaloy®* KEE Polymer
JM PVC with Elvaloy®* KEE MIN is a heat weldable thermoplastic membrane with a minimum thickness of either 60 or 72 mils.

PVC Accessories

JM 3oz Polyester Slipsheet
Needle-punched, non-UV resistant polyester separation layer used for TPO, PVC, and EPDM mechanically fastened systems and ballasted EPDM systems.
JM PVC Coated Metal
JM PVC membrane laminated with galvanized steel or aluminum to be fabricated into metal flashings and edge details.
JM PVC Detail Membrane
JM PVC Detail Membrane is a flexible, nonreinforced thermoplastic membrane used to wrap pipes and vertical stacks.
JM PVC Detail Strip
Flexible 8" (20.32 cm) strips of polyester-reinforced, thermoplastic membrane used primarily to waterproof JM PVC-Coated Metal joints.
JM PVC Heavy-Duty Walkpad
150 mil, textured, reinforced thermoplastic membrane for use on and around areas of high foot traffic.
JM PVC Penetration Pan
One-piece molded unit with a square base flange used to seal uneven difficult-to-flash membrane penetrations.
JM PVC Pipe Boots
Flexible, nonreinforced thermoplastic membrane used to flash vent stacks and round penetrations.
JM PVC Profile
Preformed, nonreinforced, extruded, heat-weldable standing seam roofing accessory used as a decorative rib.
JM PVC Safety Strip
45 mil, reinforced, UV-resistant PVC with Elvaloy®* KEE safety warning line for roof perimeters.
JM PVC Split Pipe Boot
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
JM PVC T-Joint Patch
Flexible, nonreinforced thermoplastic material used to cover joints, discs and fasteners in the membrane.
JM PVC Universal Corners
Flexible, nonreinforced, waffle-patterned thermoplastic membrane.
JM Polyester Mat Protection Slipsheet
Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.
PVC Square Pipe Boots
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
PVC Walkpad
Flexible, polyester-reinforced thermoplastic membrane intended for use as protection around high-traffic areas.

Adhesives, Cements, Sealants and More

JM EPDM/PVC Pourable Sealer
JM EPDM/PVC Pourable Sealer is a sealant for EPDM Peel & Stick Pourable Sealer Pockets or PVC systems to seal irregular penetrations.
JM One-Part Pourable Sealer
JM One-Part Pourable Sealer is used as a penetration pocket filler.
JM One-Step Foamable Adhesive
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
JM PVC All Season Sprayable Bonding Adhesive, Accessories, and Flush
JM PVC All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for PVC adhered roofing systems and wall flashings. The JM PVC All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application.
JM PVC Edge Sealant
JM PVC Edge Sealant is a liquid thermoplastic compound placed at the edge of PVC membrane seams.
JM PVC Membrane Adhesive LVOC
JM PVC Membrane Adhesive LVOC is a polymer-based adhesive for adhering smooth-backed PVC membranes to approved substrates.
JM PVC Water Based Membrane Adhesive
Our JM PVC Water Based Membrane Adhesive allows for great vertical-wall application, offers a color change indicator, and new and improved spreadability to be used to adhere JM PVC membranes.
JM Roofing System Urethane Adhesive - RSUA
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
RSUA Mini Cansiters available early May 2024.
JM Single Ply LVOC Caulk
Single Ply LVOC Caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.
JM Single Ply Membrane Cleaner - Low VOC
Single Ply Membrane Cleaner is used to remove dirt, asphalt or other contaminants from JM TPO and PVC single ply membranes to ensure a good weld or bond. Can be used prior to applying TPO Membrane Primer for peel and stick applications.
JM Single Ply Sealing Mastic
Single Ply Sealing Mastic is used to seal JM Single Ply membranes to terminations and other penetrations.
JM Two-Part Pourable Sealer
JM Two-Part Pourable Sealer is a two-part sealant used as a penetration pocket filler.
JM Two-Part Urethane Insulation Adhesive
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.

Insulation and Cover Boards

DEXcell Cement Roof Board
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
DEXcell FA Glass Mat Roof Board
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
DEXcell Glass-Mat Roof Board
DEXcell Glass-Mat Roof Board is a gypsum cover board that can be used in mechanically fastened single ply systems.
DEXcell® FA VSH Glass Mat Roof Board
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
DensDeck Prime Roof Board
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
DensDeck Roof Board
DensDeck Roof Board is a gypsum cover board with a glass mat facer.
DensDeck StormX Prime Roof Board
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
ENRGY 3 - Flat and Tapered
ENRGY 3 is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
ENRGY 3 CGF - Flat and Tapered
ENRGY 3 CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
ENRGY 3® HD
ENRGY 3® HD is a closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and high density characteristics.
ProtectoR HD
ProtectoR HD is a high-density polyiso cover board that provides excellent resistance against harsh rooftop conditions including hail, wind uplift, puncture and moisture.
RetroPlus Roof Board
RetroPlus Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
SECUROCK Cement Roof Board
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
SECUROCK Gypsum-Fiber Roof Board
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
SECUROCK Ultralight Glass-Mat Roof Board
SECUROCK Ultralight Glass-Mat Roof Board is a gypsum cover board with fiber glass facer and back.
SeparatoR
SeparatoR provides an economical solution for mechanically fastened single ply membrane recover applications while adding thermal insulation value to your building.
SeparatoR CGF
SeparatoR CGF is a versatile, ½"-thick cover board solution that is designed for re-cover applications and offers performance and value.

Fasteners and Plates

All-Purpose Fasteners
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Extra High Load Fasteners and Plates
Extra High Load #21 fasteners, #3 Phillips head and a drill point contain a corrosion-resistant coating and to be used to mechanically attach thermoplastic membranes.
High Load AccuSeam System
The High Load AccuSeam System is Premier one-step, automated, single-ply membrane seam-fastening system.
High Load Fasteners and Plates
High Load Fasteners are a #15 case-hardened steel roof membrane fastener with GALVALUME®-coated steel seam plates. these fasteners can be used in a thermoplastic induction weld system with RhinoPlate.
JM ENRGY Anchor
ENRGY™ Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
JM PVC RhinoPlate
JM PVC RhinoPlate is used to install PVC membranes using an induction weld system with JM High Load Fasteners.
JM Purlin Fastener
JM Purlin Fastener is a steel-coated roof membrane fastener with a 1⁄4" hex head and 3⁄4" drill point.
JM RetroDriller Fasteners
JM RetroDriller Fastener is designed for attaching single ply membrane systems to structural purlins (up to 3 /16”) in standing seam metal roof retrofit applications.
JM Termination Systems
JM termination systems include termination bars, anchor discs and masonry nail-in anchor and are used for membrane fastening systems.
JM isoweld
Insulation and Membrane Fastening Plate used with TPO and PVC thermoplastic membranes. Designed to be used with JM #15 Dekfast Fasteners.
Lite-Deck Fasteners and Plates
Lite-Deck Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems. They can be installed into cementitious wood fiber decks without pre-drilling.
Membrane Battens
Membrane Battens are a 1" wide, prepunched, polymer batten strips with prepunched, counter-sunk, GALVALUME®*-coated steel anchor bars.
Polymer Auger Fasteners
Polymer Auger Fasteners are solid glass-reinforced nylon membrane and insulation fasteners.
Structural Concrete Deck Fasteners and Plates
The Structural Concrete Deck Fastener is a Diamond point, nonthreaded carbon steel insulation and membrane fastener.
UltraFast AccuTrac Fastener and Plate System
UltraFast AccuTrac Fastener and Plate System is used to fasten insulation in multi-ply and single ply roofing systems.
UltraFast Fasteners and Plates
UltraFast Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems.
UltraLok Locking Impact Fastener and Plate
UltraLok Locking Impact Fasteners and Plates are a galvanized-steel tube and GALVALUME®-coated steel disc clamped to a wire-locking staple used to fasten cover boards and base sheets in multi-ply and single ply systems.

PVC Membranes

JM PVC FB with Elvaloy® KEE Polymer
JM PVC with KEE FB is a heat weldable thermoplastic membrane that utilizes a Spunbond 3.8 oz. fleece creating an extremely durable, strong yet light and flexible protection layer.
JM PVC SD Plus
JM PVC SD Plus is a heat weldable thermoplastic polyvinyl chloride membrane available in 50, 60, and 80 mil.
JM PVC SD Plus FB
JM PVC SD Plus FB is a fleece-backed PVC membrane with reinforced polyester scrim, providing strength and toughness. It is resistant to oils and fuels, with white membranes offering energy savings. It features a patented Aramid-Reinforced Edge and a Spunbond 3.8 oz. Polyester Fleece Back Mat for durability and flexibility.
JM PVC with Elvaloy®* KEE Polymer
JM PVC with the optimal amount of Elvaloy®* KEE is a heat weldable polyvinyl chloride thermoplastic membrane that provides superior resistance against oil, fuels, and other hard chemicals.
PVC mil/MIN with Elvaloy®* KEE Polymer
JM PVC with Elvaloy®* KEE MIN is a heat weldable thermoplastic membrane with a minimum thickness of either 60 or 72 mils.

PVC Accessories

JM 3oz Polyester Slipsheet
Needle-punched, non-UV resistant polyester separation layer used for TPO, PVC, and EPDM mechanically fastened systems and ballasted EPDM systems.
JM PVC Coated Metal
JM PVC membrane laminated with galvanized steel or aluminum to be fabricated into metal flashings and edge details.
JM PVC Detail Membrane
JM PVC Detail Membrane is a flexible, nonreinforced thermoplastic membrane used to wrap pipes and vertical stacks.
JM PVC Detail Strip
Flexible 8" (20.32 cm) strips of polyester-reinforced, thermoplastic membrane used primarily to waterproof JM PVC-Coated Metal joints.
JM PVC Heavy-Duty Walkpad
150 mil, textured, reinforced thermoplastic membrane for use on and around areas of high foot traffic.
JM PVC Penetration Pan
One-piece molded unit with a square base flange used to seal uneven difficult-to-flash membrane penetrations.
JM PVC Pipe Boots
Flexible, nonreinforced thermoplastic membrane used to flash vent stacks and round penetrations.
JM PVC Profile
Preformed, nonreinforced, extruded, heat-weldable standing seam roofing accessory used as a decorative rib.
JM PVC Safety Strip
45 mil, reinforced, UV-resistant PVC with Elvaloy®* KEE safety warning line for roof perimeters.
JM PVC Split Pipe Boot
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
JM PVC T-Joint Patch
Flexible, nonreinforced thermoplastic material used to cover joints, discs and fasteners in the membrane.
JM PVC Universal Corners
Flexible, nonreinforced, waffle-patterned thermoplastic membrane.
JM Polyester Mat Protection Slipsheet
Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.
PVC Square Pipe Boots
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
PVC Walkpad
Flexible, polyester-reinforced thermoplastic membrane intended for use as protection around high-traffic areas.

Adhesives, Cements, Sealants and More

JM EPDM/PVC Pourable Sealer
JM EPDM/PVC Pourable Sealer is a sealant for EPDM Peel & Stick Pourable Sealer Pockets or PVC systems to seal irregular penetrations.
JM One-Part Pourable Sealer
JM One-Part Pourable Sealer is used as a penetration pocket filler.
JM One-Step Foamable Adhesive
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
JM PVC All Season Sprayable Bonding Adhesive, Accessories, and Flush
JM PVC All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for PVC adhered roofing systems and wall flashings. The JM PVC All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application.
JM PVC Edge Sealant
JM PVC Edge Sealant is a liquid thermoplastic compound placed at the edge of PVC membrane seams.
JM PVC Membrane Adhesive LVOC
JM PVC Membrane Adhesive LVOC is a polymer-based adhesive for adhering smooth-backed PVC membranes to approved substrates.
JM PVC Water Based Membrane Adhesive
Our JM PVC Water Based Membrane Adhesive allows for great vertical-wall application, offers a color change indicator, and new and improved spreadability to be used to adhere JM PVC membranes.
JM Roofing System Urethane Adhesive - RSUA
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
RSUA Mini Cansiters available early May 2024.
JM Single Ply LVOC Caulk
Single Ply LVOC Caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.
JM Single Ply Membrane Cleaner - Low VOC
Single Ply Membrane Cleaner is used to remove dirt, asphalt or other contaminants from JM TPO and PVC single ply membranes to ensure a good weld or bond. Can be used prior to applying TPO Membrane Primer for peel and stick applications.
JM Single Ply Sealing Mastic
Single Ply Sealing Mastic is used to seal JM Single Ply membranes to terminations and other penetrations.
JM Two-Part Pourable Sealer
JM Two-Part Pourable Sealer is a two-part sealant used as a penetration pocket filler.
JM Two-Part Urethane Insulation Adhesive
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.

Insulation and Cover Boards

DEXcell Cement Roof Board
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
DEXcell FA Glass Mat Roof Board
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
DEXcell Glass-Mat Roof Board
DEXcell Glass-Mat Roof Board is a gypsum cover board that can be used in mechanically fastened single ply systems.
DEXcell® FA VSH Glass Mat Roof Board
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
DensDeck Prime Roof Board
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
DensDeck Roof Board
DensDeck Roof Board is a gypsum cover board with a glass mat facer.
DensDeck StormX Prime Roof Board
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
ENRGY 3 - Flat and Tapered
ENRGY 3 is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
ENRGY 3 CGF - Flat and Tapered
ENRGY 3 CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
ENRGY 3® HD
ENRGY 3® HD is a closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and high density characteristics.
ProtectoR HD
ProtectoR HD is a high-density polyiso cover board that provides excellent resistance against harsh rooftop conditions including hail, wind uplift, puncture and moisture.
RetroPlus Roof Board
RetroPlus Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
SECUROCK Cement Roof Board
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
SECUROCK Gypsum-Fiber Roof Board
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
SECUROCK Ultralight Glass-Mat Roof Board
SECUROCK Ultralight Glass-Mat Roof Board is a gypsum cover board with fiber glass facer and back.
SeparatoR
SeparatoR provides an economical solution for mechanically fastened single ply membrane recover applications while adding thermal insulation value to your building.
SeparatoR CGF
SeparatoR CGF is a versatile, ½"-thick cover board solution that is designed for re-cover applications and offers performance and value.

Fasteners and Plates

All-Purpose Fasteners
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Extra High Load Fasteners and Plates
Extra High Load #21 fasteners, #3 Phillips head and a drill point contain a corrosion-resistant coating and to be used to mechanically attach thermoplastic membranes.
High Load AccuSeam System
The High Load AccuSeam System is Premier one-step, automated, single-ply membrane seam-fastening system.
High Load Fasteners and Plates
High Load Fasteners are a #15 case-hardened steel roof membrane fastener with GALVALUME®-coated steel seam plates. these fasteners can be used in a thermoplastic induction weld system with RhinoPlate.
JM ENRGY Anchor
ENRGY™ Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.
* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.
JM PVC RhinoPlate
JM PVC RhinoPlate is used to install PVC membranes using an induction weld system with JM High Load Fasteners.
JM Purlin Fastener
JM Purlin Fastener is a steel-coated roof membrane fastener with a 1⁄4" hex head and 3⁄4" drill point.
JM RetroDriller Fasteners
JM RetroDriller Fastener is designed for attaching single ply membrane systems to structural purlins (up to 3 /16”) in standing seam metal roof retrofit applications.
JM Termination Systems
JM termination systems include termination bars, anchor discs and masonry nail-in anchor and are used for membrane fastening systems.
JM isoweld
Insulation and Membrane Fastening Plate used with TPO and PVC thermoplastic membranes. Designed to be used with JM #15 Dekfast Fasteners.
Lite-Deck Fasteners and Plates
Lite-Deck Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems. They can be installed into cementitious wood fiber decks without pre-drilling.
Membrane Battens
Membrane Battens are a 1" wide, prepunched, polymer batten strips with prepunched, counter-sunk, GALVALUME®*-coated steel anchor bars.
Polymer Auger Fasteners
Polymer Auger Fasteners are solid glass-reinforced nylon membrane and insulation fasteners.
Structural Concrete Deck Fasteners and Plates
The Structural Concrete Deck Fastener is a Diamond point, nonthreaded carbon steel insulation and membrane fastener.
UltraFast AccuTrac Fastener and Plate System
UltraFast AccuTrac Fastener and Plate System is used to fasten insulation in multi-ply and single ply roofing systems.
UltraFast Fasteners and Plates
UltraFast Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems.
UltraLok Locking Impact Fastener and Plate
UltraLok Locking Impact Fasteners and Plates are a galvanized-steel tube and GALVALUME®-coated steel disc clamped to a wire-locking staple used to fasten cover boards and base sheets in multi-ply and single ply systems.

PVC Installation and Details

When it comes to design, we've got the tools to get you from the desk to the roof. Here you will find all of the PVC specifications, 3-part specs, details and installation guides. If you have any questions when it comes to installation, please contact our Specifier Services Group for design and your local technical representative for the field.

Flashing Details
Fastening Patterns
Assembly Plates
Specifications
Installation Guides

PVC MASTER DETAILS	*CAD*	*PVC*
P-FW-M1 PVC Base & Wall Flashing with Coping Master Detail	DWG	PDF
P-FW-M1I PVC Base & Wall Flashing with Coping Isometric View Master Detail	DWG	PDF
P-FW-M2I Highwall Flashing with Metal Backing Strip Isometric View Master Detail	DWG	PDF
P-FW-M3I PVC Rhinobond Continuous Wall Flashing Isometric View Master Detail	DWG	PDF
P-FW-M4I PVC Rhinobond Wall Flashing Isometric View Master Detail	DWG	PDF

*BASE TIE-IN DETAILS*	*CAD*	*PDF*
P-FW-B1 Base Tie-In - Fastener & Plate	DWG	PDF
P-FW-B2 Base Tie-In - Fastener & Plate - On Wall	DWG	PDF
P-FW-B3 Membrane Flashing Base Tie In- High Internal Pressure	DWG	PDF
P-FW-B4 Base Tie-In - RhinoPlate System	DWG	PDF
P-FW-B5 Base Tie-In (Loose Hung Flashing)	DWG	PDF
P-FW-B6 Base Tie-in Fleece Backed PVC in RSUA	DWG	PDF
P-FW-B6I PVC Fleece backed in RSUA Base & Wall Flashing	DWG	PDF
P-FW-B7 Base Tie-In Fleece Backed PVC in 2 Part UIA Spatter	DWG	PDF
P-FW-B7I - PVC Fleece Backed in Two Part UIA Base & Wall Flashing Spatter	DWG	PDF

*INTERMEDIATE TERMINATION DETAILS*	*CAD*	*PDF*
P-FW-I1 PVC Intermediate Membrane Attachment with Fastener & Plate	DWG	PDF
P-FW-I2 PVC Detail Strip Wall Flashing Attachment with Fastener & Plate	DWG	PDF
P-FW-I3 PVC Intermediate Membrane Attachment with Termination Bar	DWG	PDF
P-FW-I4 Termination Bar Flashing Attachment with Welded PVC Detail Strip	DWG	PDF
P-FW-I5 Continuous Flashing Attachment- Termination Bar	DWG	PDF
P-FW-I6 Split Flashing Attachment- Termination Bar	DWG	PDF
P-FW-I7 PVC Intermediate Termination with Counter Flashing & Cut-In Reglet	DWG	PDF
P-FW-I8 PVC Intermediate Termination with Surface Mounted Counterflashing	DWG	PDF
P-FW-I9 PVC Intermediate Termination with Through-Wall Counterflashing	DWG	PDF
P-FW-I10 PVC Intermediate Termination with Termination Bar	DWG	PDF
P-FW-I11 PVC Intermediate Termination Below Wall Cladding	DWG	PDF
P-FW-I12 PVC Intermediate Membrane Attachment w/Termination Bar	DWG	PDF
P-FW-I13 PVC Intermediate Termination (Loose Hung Flashing)	DWG	PDF

TOP OF WALL DETAILS	CAD	PDF
P-FW-T1 Fabricated Metal Coping Over Adhered PVC	DWG	PDF
P-FW-T2 Presto Lock Coping System Over PVC	DWG	PDF
P-FW-T3 Presto-Tite Fascia System On Sloped Parapet	DWG	PDF
P-FW-T4 Perma-Tite Continuous Cleat Coping System Over PVC	DWG	PDF

*PVC MEMBRANE SEAMING DETAILS*	*CAD*	*PDF*
P-MS-01 Cut Edge Sealant	DWG	PDF
P-MS-02 In-Lap Fastening Method - Steel Deck	DWG	PDF
P-MS-03 In-Lap Fastening Method - Plywood Deck	DWG	PDF
P-MS-04 In-Lap Fastening Method - Concrete Deck	DWG	PDF
P-MS-05 In Lap Fastening Method-Wood Plank Deck	DWG	PDF
P-MS-06 Continuous Strip Fastening Method	DWG	PDF
P-MS-07 Membrane Side Lap	DWG	PDF
P-MS-08 PVC Fleece Backed Adhesive Applied Membrane Butted End Lap	DWG	PDF
P-MS-09 Slope Transition-Valley	DWG	PDF
P-MS-10 Slope Transition-Ridge	DWG	PDF
P-MS-11 JM PVC Profile Attachment	DWG	PDF
P-MS-12 PVC Standing Seam Profile Lap Joint	DWG	PDF
P-MS-13 JM PVC Profile Spacing on 76" Fleece Backed Sheets	DWG	PDF
P-MS-14 JM PVC Profile Spacing on 144" Fleece Backed Sheets	DWG	PDF
P-MS-15 JM PVC Profile Spacing on 78" PVC Sheets	DWG	PDF
P-MS-16 JM PVC Profile Spacing on 120" PVC Sheets	DWG	PDF
P-MS-17 PVC T-Joint Patch	DWG	PDF

*PVC FLASHING CURB & CORNER DETAILS*	*CAD*	*PDF*
P-FC-01 Prefabricated Metal Curb Base Flashing	DWG	PDF
P-FC-02 Roof Hatch	DWG	PDF
P-FC-03 Outside Corner	DWG	PDF
P-FC-04 Inside Corner	DWG	PDF
P-FC-05 Wood Curb Base Flashing	DWG	PDF
P-FC-06 Flashing Wall With Term Bar and Corner Coping	DWG	PDF

*PVC PROTECTION DETAILS*	*CAD*	*PDF*
P-PT-01 Support-Light	DWG	PDF
P-PT-02 Support-Medium	DWG	PDF
P-PT-03 Support-Heavy	DWG	PDF
P-PT-04 Walkway-Concrete Paver	DWG	PDF
P-PT-05 PVC Walkpads Over Adhered PVC Membrane	DWG	PDF
P-PT-06 PVC Walkpad Fleece Backed System Fully Adhered	DWG	PDF
P-PT-07 PVC Walkpad Over Mechanically Fastened PVC Membrane	DWG	PDF
P-PT-08 Lightning Rod-Wall Mount	DWG	PDF
P-PT-09 Lightning Rod-Roof Mount	DWG	PDF
P-PT-10 Grease Trap	DWG	PDF
P-PT-11 JM ENRGY ANCHOR - PVC	DWG	PDF
P-PT-12 JM PVC Safety Strip Over PVC Membrane	DWG	PDF
P-PT-13 Hurricane Peel Stop Anchor Bar	DWG	PDF

*PVC COATED METAL DETAILS*	*CAD*	*PDF*
P-FE-CM1 Drip Edge-PVC Coated Metal	DWG	PDF
P-FE-CM2 Drip Edge Adhered Membrane PVC Coated Metal	DWG	PDF
P-FE-CM3 Gravel Stop-PVC Coated Metal	DWG	PDF
P-FE-CM4 Gravel Stop Adhered Membrane Only- PVC Coated Metal	DWG	PDF
P-FE-CM5 Gutter & PVC Coated Metal Edge	DWG	PDF
P-FE-CM6 Butt Joint At Edge-PVC Coated Metal	DWG	PDF

*PRE-MANUFACTURED (METAL) DETAILS*	*CAD*	*PDF*
P-FE-P1 JM Presto Lock Fascia System	DWG	PDF
P-FE-P2 JM Presto-Tite Fascia System For Single Ply Systems	DWG	PDF
P-FE-P3 JM Rail Fascia System For Single Ply Roof	DWG	PDF
P-FE-P4 JM Perma-Tite System 200 Fascia Over PVC	DWG	PDF
P-FE-P5 JM Presto Weld Drip Edge	DWG	PDF

*PVC DRAINS & VENTS DETAILS*	*CAD*	*PDF*
P-DV-01 Vent Pipe	DWG	PDF
P-DV-02 Vent Pipe-Hot	DWG	PDF
P-DV-03 Through-wall Scupper	DWG	PDF
P-DV-03I Through-wall Scupper	DWG	PDF
P-DV-04 Primary Scupper With Tapered Insulation Sump	DWG	PDF
P-DV-05 Low-Wall Primary Scupper Flashing	DWG	PDF
P-DV-06 Overflow Scupper	DWG	PDF
P-DV-07 Primary Drain Sump- Low Slope- Up To 3:12 Slope	DWG	PDF
P-DV-08 Primary Drain Sump- Steep Slope- Greater Than 3:12 Slope	DWG	PDF
P-DV-09 Primary Drain Sump- Fleece Backed Membrane	DWG	PDF
P-DV-09I PVC Fleece Backed Adhesive Applied Primary Drain In Sump	DWG	PDF
P-DV-10 JM PVC Alumaweld Drain	DWG	PDF
P-DV-11 Primary Drain Sump-Mechanically Fastened Membrane	DWG	PDF
P-DV-12 JM PVC Hercules Retrodrain	DWG	PDF
P-DV-13 Primary and Overflow Drain Sump (Low Slope) up to 3:12 Slope	DWG	PDF

*PVC FLASHING PENETRATION DETAILS*	*CAD*	*PDF*
P-FP-01 PVC Pipe Boot	DWG	PDF
P-FP-02 PVC Coated Metal Penetration Pocket	DWG	PDF
P-FP-03 PVC Split Pipe Boot- Round	DWG	PDF
P-FP-04 PVC Split Pipe Boot- Square - Clamped	DWG	PDF
P-FP-05 PVC Split Pipe Boot- Square	DWG	PDF
P-FP-06 Field Fabricated Pipe Penetration	DWG	PDF
P-FP-07 JM PVC Penetration Pan	DWG	PDF

*PVC TIE-IN FLASHING DETAILS*	*CAD*	*PDF*
P-TI-01 Transition For Staged Roofing-PVC Coated Metal	DWG	PDF
P-TI-02 Transition To Shingle Roof With PVC Coated Metal	DWG	PDF
P-TI-03 Curb Tie-In To Roof By Others	DWG	PDF

*PVC EXPANSION JOINT DETAILS*	*CAD*	*PDF*
P-EJ-01 Expansion Joint-Roof To Wall	DWG	PDF
P-EJ-02 Expansion Joint-Roof To Roof	DWG	PDF
P-EJ-03 Expand-O-Flash Roof To Roof Expansion Joint Cover- Style PVC EJ/WC	DWG	PDF
P-EJ-04 Expand-O-Flash RoofTo Wall - Style EJ	DWG	PDF
P-EJ-05 Expand-O-Flash Curb To Curb Expansion Joint Cover- Style CF	DWG	PDF
P-EJ-06 Expand-O-Flash Curb To Wall Expansion Joint Cover-Style CF/EJ	DWG	PDF
P-EJ-07 Expand-O-Flash Curb To Wall Expansion Joint Cover-Style PVC EJ/WC	DWG	PDF
P-EJ-08 Expand-O-Flash Curb To Curb Expansion Joint Cover-Style PVC EJ/WC	DWG	PDF

*VARIOUS (MISCELLANEOUS) DETAILS*	*CAD*	*PDF*
P-FE-V1 Wood Nailer Attachement	DWG	PDF
P-FE-V2 Gutter & Termination Bar	DWG	PDF
P-FE-V3 RhinoPlate-Standing Seam Retro-Fit Purlin Attachment	DWG	PDF
P-FE-V4 RhinoPlate-Standing Seam Retro-Fit Gravel Stop	DWG	PDF
P-FE-V5 RhinoPlate-Standing Seam Retro-Fit Gutter	DWG	PDF


SINGLE PLY LIQUID FLASHING CURB AND CORNER DETAIL	*CAD*	DWG	*BIM*
SPL-FC-01 Typical TPO or PVC Door Sill Flashing	PDF	DWG	-


*SINGLE PLY LIQUID FLASHING DRAINS AND VENTS DETAILS*	CAD	PDF	BIM
SPL-DV-01 Throughwall Metal Scupper with TPO or PVC Membrane	DWG	PDF	-


SINGLE PLY LIQUID FLASHING PENETRATION DETAILS	CAD	PDF	BIM
SPL-FP-01 TPO or PVC Roof Multi-Pipe Penetration Flashing	DWG	PDF	-
SPL-FP-03 TPO or PVC Square Tube Penetration Flashing	DWG	PDF	-
SPL-FP-05 TPO or PVC Wide Flange Penetration Flashing	DWG	PDF	-
SPL-FP-07 Wide Flange Flashing Scrim Layout	DWG	PDF	-
SPL-FP-08 TPO or PVC Angle Iron Penetration Flashing	DWG	PDF	-
SPL-FP-10 Angle Iron Flashing Scrim Layout	DWG	PDF	-

*SINGLE PLY LIQUID FLASHING WALL DETAIL*	*CAD*	PDF	*BIM*
SPL-FW-01 Wall Mounted Ladder TPO or PVC Base Flashing	DWG	PDF	-
SPL-FW-03 Deck Mounted Ladder TPO or PVC Base Flashing	DWG	PDF	-
SPL-FW-05 Flashing Wall Optional Terminations	DWG	PDF	-

*SINGLE PLY LIQUID FLASHING EXPANSION JOINTS DETAILS*	*CAD*	PDF	*BIM*
SPL-EJ-01 Expansion Joint TPO or PVC Roof to Wall	DWG	PDF	-

*SINGLE PLY ONE-PART POURABLE SEALER DETAILS*	*CAD*	*PDF*	*BIM*
P1P-FP-01 PVC Multi-Pipe Penetration One-Part Pourable Sealer	DWG	PDF	-
P1P-FP-02 - PVC Square Tube Penetration One-Part Pourable Sealer	DWG	PDF	-
P1P-FP-03 - PVC Wide Flange Penetration One-Part Pourable Sealer	DWG	PDF	-
P1P-FP-04 - Wide Flange Flashing Scrim Layout One-Part Pourable Sealer	DWG	PDF	-
P1P-FP-05 - PVC Angle Iron One-Part Pourable Sealer	DWG	PDF	-
P1P-FP-06 - Angle Iron Flashing Scrim Layout One-Part Pourable Sealer	DWG	PDF	-

PVC BITUMINOUS HYBRID DETAILS	CAD	PDF
PH-FW-M1 PVC Hybrid Base and Wall Flashing With Coping	DWG	PDF
PH-FW-M1I PVC Hybrid Base & Wall Flashing with Coping - Isometric View	DWG	PDF
PH-FW-M2I Highwall Flashing with Metal Backing Strip - Isometric View	DWG	PDF
PH-FW-B1 Membrane Flashing Base Tie-In	DWG	PDF
PH-FW-B2 Base Tie-In - Fastener & Plate - With Cant	DWG	PDF
PH-FW-B3 Base Tie-In - Fastener & Plate - On Wall	DWG	PDF
PH-FW-B4 Base Tie in With Term Bar	DWG	PDF
PH-FC-01 Prefabricated Metal Curb Base Flashing With Cant	DWG	PDF
PH-FC-02 Prefabricated Metal Curb Base Flashing	DWG	PDF
PH-MS-01 PVC Fleece Backed Membrane Butted End Lap	DWG	PDF
PH-FE-CM1 Drip Edge - PVC Coated Metal	DWG	PDF
PH-FE-CM2 Gravel Stop - PVC Coated Metal	DWG	PDF
PH-FE-CM3 Gutter & PVC Coated Metal Edge	DWG	PDF
PH-FE-P1 JM Presto Lock Fascia System	DWG	PDF
PH-FE-P2 Presto Tite Fascia System	DWG	PDF
PH-DV-01 Field Fabricated Vent Pipe	DWG	PDF
PH-DV-02 PVC Fleece Backed Hybrid Drain Detail	DWG	PDF
PH-DV-03 PVC Fleece Backed Hybrid Vent Pipe	DWG	PDF
PH-FP-01 PVC Fleece Backed Hybrid Pipe Boot	DWG	PDF

VAPOR BARRIER SA DETAILS	CAD	PDF
VB-1 (ALT) JM Vapor Barrier SA - Wall Base Detail - Alt	DWG	PDF
VB-1 JM Vapor Barrier SA - Wall Base Detail	DWG	PDF
VB-2 JM Vapor Barrier SA - Pipe Penetration Detail	DWG	PDF
VB-3 JM Vapor Barrier SA - Drain Detail	DWG	PDF
VB-4 JM Vapor Barrier SA - Detail at Field Laps	DWG	PDF
VB-5 JM Vapor Barrier SA - Outside Curb Detail	DWG	PDF
VB-6 JM Vapor Barrier SA - Inside Curb Detail	DWG	PDF

*VAPOR BARRIER SAR DETAILS*	*CAD*	*PDF*
VB-1 (ALT) JM Vapor Barrier SAR - Wall Base	DWG	PDF
VB-1 JM Vapor Barrier SAR - Wall Base	DWG	PDF
VB-2 JM Vapor Barrier SAR - Pipe Penetration	DWG	PDF
VB-3 JM Vapor Barrier SAR - Drain	DWG	PDF
VB-4 JM Vapor Barrier SAR - Field Laps	DWG	PDF
VB-5 JM Vapor Barrier SAR - Outside Curb	DWG	PDF
VB-6 JM Vapor Barrier SAR - Inside Curb	DWG	PDF

Assembly Plate Use Instructions

*Please be sure to download the file before selecting your assembly.*

2x4 Ft. Roof Insulation Fastener Placement - Mechanically Fastened, Adhered

4x4 Ft. Roof Insulation Fastener Placement - Mechanically Fastened, Adhered

4x8 Ft. Roof Insulation Fastener Placement - Mechanically Fastened, Adhered

JM PVC RhinoPlate Fastening System 6-10-15

JM PVC RhinoPlate Fastening System 8-15-20

PM-12 FULL JM PVC Mechanically Fastened (12" O.C.)

PM-12 Mechanically Fastened JM PVC (12" O.C.)

PM-18 Mechanically Fastened JM PVC (18" O.C.)

PM-6 FULL JM PVC Mechanically Fastened (6" O.C.)

PM-6 Mechanically Fastened JM PVC (6" O.C.)

FA-16 Fully Adhered Cover (16-24-32)

FA-8 Fully Adhered Cover (8-16-32)

PUA-4-4-4 PVC-FB Urethane Adhesive

PUA-6-4-4 PVC-FB Urethane Adhesive

PUA-12-6-4 PVC-FB Urethane Adhesive

CBUA-12-6-4 Cover Board Urethane Adhesive

ICBUA-8-4-4 Insulation and Cover Board Urethane Adhesive

ICBUA-12-6-4 Insulation and Cover Board Urethane Adhesive

INUA-12-6-4 Insulation Urethane Adhesive

Assembly Plate Use Instructions

*Please be sure to download the file before selecting your assembly.*

Single Ply PVC Assembly Plates

PVC Adhered Assembly Plate

PVC Mechanically Attached Assembly Plate

PVC Hybrid Assembly Plates

2 Ply PVC Hybrid Bonded to Insulation

2 Ply PVC Hybrid Including Nailed Base Sheet

3 Ply PVC Hybrid Bonded to Insulation

3 Ply PVC Hybrid Including Nailed Base Sheet

4 Ply PVC Hybrid Bonded to Insulation

4 Ply PVC Hybrid Including Nailed Base Sheet

Download the 3-Part PVC Master Spec

Download the 3-Part PVC/SBS Hybrid Master Spec

Installation Guides

Complete PVC Application Guide

JM Vapor Barrier SA Installation Guide

JM Vapor Barrier SA Installation Guide - Español

RhinoPlate Installation Guide

RhinoPlate Installation Guide - Español

JM SP Liquid Flashing Installation Guide

JM SP Liquid Flashing Installation Guide - Español

JM PVC All Season Sprayable Bonding Adhesive Quick Installation Guide

JM PVC All Season Sprayable Bonding Adhesive Quick Installation Guide - Español

JM Two-Part UIA Adhesive - Canister

Additional Resources

JM PVC Membrane Selector Guide

JM PVC Membrane Selector Guide - Español

Adhesives and Cements Selector Guide

Insulation and Cover Board Selector Guide

Insulation and Cover Board Selector Guide - Español

Fasteners and Plates Selector Guide

Sampling of Common Rooftop Chemicals

Documents

Videos

Behind the Scenes

Benefits of a PVC System

Learn more about why a PVC system may be the right choice for your next project.

Watch Here
Behind the Scenes

PVC All Season Sprayable Bonding Adhesive Training Video

Learn how to install PVC All Season Sprayable Bonding Adhesive.

Watch Here
Behind the Scenes

In Depth: PVC All Season Sprayable Bonding Adhesive

This is an In Depth training video for our newly launched product PVC All Season Sprayable Bonding Adhesive.

Watch Here
Behind the Scenes

What is PVC?

Heidi Ellsworth meets with Brandon Mark and together, they go in depth about PVC single-ply roofing - what it is, what its benefits are, and how it is installed.

Watch Here

PVC Project Spotlight

Green Local School District

High School Pursues LEED® Gold on JM PVC Roof With ELVALOY® KEE

The design of the Green Local School District (GLSD) K-12 building represents a growing trend in the construction of modern educational facilities. Many local school districts and various states are now considering the entire building envelope by requiring LEED Silver certification.

Learn More
DePortola Middle School

Enhanced New Look Delivers Superior Performance with JM PVC with ELVALOY® KEE

The old three-tab shingles on the De Portola Middle School roof were deteriorating and dislodging. The transition point of the asphalt shingles to a low-slope, built-up roof was weakening and leaks were starting to occur. With a new building nearby on the campus, the original middle school was showing its age.

Learn More
Planet Hollywood

Vegas Miracle Mile Shops Re-Roofed Using Complete JM System

This massive 300,000 sf project over the Miracle Mile shops at Planet Hollywood was installed by Commercial Roofers, Inc.. The solution chosen was a Johns Manville PVC RhinoPlate System. This was a very unique project due to the vast amount of penetrations on the roof.

Learn More
Orlando City Hall

Johns Manville Offers an Efficient Approach to Restoration

25 years after construction, Orlando’s City Hall roof needed to be evaluated for replacement or restoration. Through extensive research, including moisture survey testing, it was determined that restoring the existing roof was the most efficient approach for this seven-level, nine-story downtown showcase.

Learn More
Chicago UNO Charter School

JM Conctractor Meets Extraordinary Roofing Requirements

The Chicago UNO (United Neighborhood Organization) Charter School is an integral part of the K-11 Hispanic community. Charter schools in the U.S. typically draw on the latest educational techniques to meet the highest academic standards.

Learn More
The Preserve

Senior Living Complex Secure with JM Fleece-Backed PVC Roof

The Preserve at Palm-Aire is a landmark senior-living community in Pompano Beach situated on 13 acres of lush, beautiful grounds in South Florida. Offering both Independent Living andAssisted Living programs, the health care facility’s primary focus is on preserving residents’ quality of life in every way possible.

Learn More
Streetsboro City Schools

Application Concerns in Winter Conditions Are Solved with 12' JM PVC with ELVALOY® KEE

Winters in Northeast Ohio are consistently challenging with snow, wind and freezing temperatures. For a new high school in Streetsboro, Ohio, roofing contractor Boak & Sons relied on their experience with Johns Manville systems.

Learn More

Roofing Institute Contractor Training

Our JM approved contractors can take advantage of hands-on training and learn all the latest best practices for your profession through our learning program. As low-slope roof technology, materials and performance demands evolve, it is crucial to understand new materials and technologies. JM has built an education and development initiative that utilizes our over 160 years of experience in commercial roofing.

Training mechanically fastening TPO around a penetration.

BURSI for Design Professionals

Our BURSI® program, run by our Specifier Services Team offers customizable education programs that are certified by American Institute of Architects (AIA). We offer anything from one-hour “Lunch and Learns” to a 10-hour, multiple-day seminar. Our program is known as (BURSI) Better Understanding of Roofing Systems Institute. Please contact your local sales representative for more information on upcoming BURSI dates or visit our calendar to see the next educational seminar is in your area.

Roofing Systems Blog

Commercial Roofing

JM Helps Committed Team Deliver Time-Sensitive Reroof at CAM St. Louis

Known locally as CAM St. Louis, this museum is part of the city’s popular Grand Center Arts District. Its 500,000 annual visitors are just shy of double the city’s year-round...

Read this article
Commercial Roofing

ModBit Roofing Day 2024

Thanks to our distribution partners, the versatility and reliability of JM’s Mod Bit roofing systems took center stage this month in Florida. Teaming with SPEC Building Mater...

Read this article
Commercial Roofing

Above It All Episode 43: Product Manager Insights on New JM Offerings

Podcast episode 41 features Product Managers for Johns Manville, Brandon Mark and Kaare Kurtzke. Brandon and Kaare discuss new product offerings for JM in 2024 and their bene...

Read this article
Commercial Roofing

Above It All Episode 42: Customer Relationships are the Engine on Which the JM Roofing Runs

Podcast episode 42 features Regional Services Manager for Johns Manville, Zach Carpenter. Zach discusses the value of customer service in the workplace and why JM's customer ...

Read this article
Commercial Roofing

JM’S BURSI Draws Repeat Visitor Nearly Five Decades Later

Atari debuted its 2600 video game system. The first Apple computer went on sale. Pet Rocks were the companion everybody had to have. Space Mountain opened at Disneyland. JM ...

Read this article
Commercial Roofing

JM Roofing Offers 101 Training on Popular Membranes and Insulation

Contractors looking to build up their roofing knowledge need to go no further than the coffee shop. JM recently joined forces with Roofers Coffee Shop, partnering to deliver ...

Read this article
Commercial Roofing

JM Owner Services Technical Team Presents at IIBEC Conference

A standing room-only crowd of more than 450 people recently gained insight on how to do just that thanks to JM Owner Services Technical Manger Rick Gustin and Owner Services ...

Read this article
Commercial Roofing

JM Provides Turnkey Solution for New Construction

A former manufacturing facility for coke used in steel production has a new life as a mixed-use industrial complex — under Johns Manville roofs.

Read this article
Commercial Roofing

Partnering with Johns Manville for Your Roofing Needs

In the roofing industry, it's crucial to have a partner that can support you through all the ups and downs. At Johns Manville, our teams are dedicated to being the most acces...

Read this article

Explore More

Commercial Roofing News

PVC Roofing Systems